Drivers all know that the car has to go to 4S store for maintenance during the period of driving, and the service life of the car that is frequently maintained is greatly increased while the safety factor is also high, not maintaining, reducing the service life of the car, not to say, In the day-to-day work, there will be a little trouble from time to time, affecting the normal use, and even endangering the safety of life. The same is true of Induction heat treatment furnace for steel bars, steel pipes, rebar, rebar and other metal workpieces. This is not true. In the past few days, many people have come to our technicians to ask how the induction heating furnace should be maintained. Today, take this opportunity to tell you how to maintain the metal induction heating furnace, I hope that after you see, you can also give your equipment maintenance.
1. Periodic inspection of contactors, capacitors, inductors, thyristors, transistor, IGBT, STT, MOS, transformers, main circuits, functional board wiring, loosening, poor contact, ablative phenomena, and regular inspection of contactors, capacitors, inductors, thyristors, transistor transformers, main circuits, functional boards, etc. If loose or bad contact phenomenon, timely change, can not be forced to use, so as not to cause major accidents.
2, periodically check whether the load wiring is intact: when you use induction heating equipment, you should periodically check the contact of the induction ring, so as to avoid loosening the contact and affect the use.
3. Check the water path regularly, check the scale and flow rate of the cooling water path. We check the scale regularly to prevent excessive scaling from blocking the water path and thus affecting the use of the equipment. At the same time, we also need to check the pipes, see if the pipes are aging, once aging, we need to replace them in a timely manner.
Overseas manager: Tom Wang
Phone: 0086-13303078975(whatsapp, wechat,line)
Specialist of bar heat treatment furnace in China; Glad to be your business partner in induction heating field.
Post time: 04-18-2019