Phone: +86-13303078975

Steel billet induction heating furnace – FOREVER Electromechanical

The steel billet induction heating furnace FOREVER Electromechanical Co., Ltd. focuses on the research, development and production of induction heating equipment. The products are safe, reliable and stable in performance. Its steel billet heating equipment has uniform heating, no bending, no deformation, and Yuantuo provides users with technical guidance free of charge

Process parameters and characteristics of billet induction heating furnace:

Equipment name: billet heating furnace

Steel type and material: plain carbon steel alloy steel, etc

Billet size range: (6mm × 6mm)-(500mm × 500mm)

Billet length range: above 0.5m

The steel billet induction heating equipment has different degrees of bending according to different steel types of workpieces. If the bending degree of the billet is greater than 3mm/m before it is fed into the electric furnace, you can adjust the size of the inductor according to the bending degree of your steel grade to meet your requirements.

The temperature before the billet surface is put into the furnace and the temperature after the billet is put out of the furnace: according to the effect required by the user, we design and produce the billet. The billet is heated evenly, without burning or cracking, and the tensile strength and straightness can meet the user’s needs.

Feeding and guidance system: each axis is driven by an independent motor reducer, and multi axis drive is set. A single frequency converter is used to control the synchronization of multi axis operation. The components are selected from well-known brands, with reliable quality and stable operation. 304 non-magnetic stainless steel guide wheel is used to keep the axial direction of the guide wheel moderately elastic to adapt to the bending of the billet within the allowable range.

The closed loop temperature control of electric induction billet heating furnace is composed of the American Leitai infrared thermometer and the German Siemens S7. The closed loop control system automatically adjusts the power supply according to the initial temperature and feed speed of the billet entering the induction heater, so that the heating temperature remains constant before being discharged from the furnace and the workpiece is heated evenly.

contact us

Overseas manager: Tom Wang

Phone: 0086-13303078975(whatsapp, wechat,line)

Post time: 09-23-2022