The performance of this Steel pipe annealing furnace is very impressive.
A pipe is a device used for transporting gas, liquid or solid particles, which is connected by pipes, fittings and valves. Pipes are widely used mainly in water supply, drainage, heating, gas supply, long distance transportation of oil and gas, agricultural irrigation, hydraulic engineering and various industrial installations. Therefore, there are certain requirements for the performance of the pipeline. It is necessary to improve the mechanical performance of the pipeline and prolong its service life through the annealing process. At present, the medium frequency steel pipe annealing furnace is used as a kind of annealing furnace by various pipeline manufacturers, and gradually begins to replace the traditional heating equipment.
It is suitable for the heat treatment of stainless steel pipe, copper pipe, steel tube, straight pipe and seamless steel pipe. The general medium frequency induction heat treatment furnace gives the annealing temperature range of 400~1100 C to the steel pipe, and the steel pipe annealing furnace is equipped with the roller bottom transmission system and is suitable for continuous work. The steel pipe annealing furnace is composed of the feeding roller table, heating system, discharging roller table, blanking mechanism and control system. Induction heat treatment furnace uses electromagnetic induction to heat the workpiece, and the heating temperature of the steel pipe annealing furnace is controlled automatically by closed loop temperature control system. The mechanical transmission system of the intermediate frequency induction heat treatment furnace from the loading to the discharge is controlled automatically by the PLC programmable controller.
Due to the principle of electromagnetic induction used in the steel pipe annealing furnace, and the heat is generated from the inside of the workpiece so as to achieve the purpose of heating purposes. The intermediate frequency induction heat treatment furnace is superior to the traditional heating equipment. Firstly, it does not pollute the environment. The heating mode of the steel pipe annealing furnace is a non-contact heating form, which eliminates the loss of heat in the air in the heat transfer heating of the traditional heating equipment, and causes the harsh environment of the surrounding high temperature. Electromagnetic induction heating, which does not produce high temperature, exhaust gas, waste smoke, dust and noise, is a green energy saving and environmental friendly heat treatment equipment. The use of steel pipe annealing furnace can improve the image of the factory, the enthusiasm of the workers, and the efficiency of the factory. What reason do we have to refuse?
Contact person: Hailee Ma
Phone: 0086-18932783253(whatsapp, wechat)
Specialist of long bar heat treatment machine is glad to be your partner in the field of induction heating.
Post time: 07-17-2018