The failure of steel bar induction heating furnace and safety accidents in production are mainly caused by negligence and inadequate preventive measures. Strengthen the understanding of safety production and take corresponding preventive measures. Most accidents can be prevented. Let’s take a look at how to ensure the safety production of steel bar induction heating furnace.
Familiar with the operation procedures of steel Induction heating equipment.
The safe production of steel bar induction heating furnace depends on the careful operation of the operator and the mastery of the technical performance of the induction heating equipment, so be familiar with and master the operation requirements of the induction heating equipment. It is the responsibility of every operator to discuss the potential accidents and preventive measures on the work site and with the manager. In order to ensure operation safety, the operation common sense of steel bar induction heating furnace must be familiar with and fully observed.
Inspection before startup of steel bar induction heating furnace.
Before starting the steel bar induction heating furnace, it is necessary to confirm that the protective device is safe and free of damage, check whether the circuit system is normal and whether there is electric leakage, and check whether all parts of the equipment are fastened and installed, so as to ensure that the steel bar induction heating furnace is restarted without any hidden dangers.
Precautions during maintenance.
1. Cut off the wire. Before carrying out any form of maintenance work on steel rod induction heating furnace and any equipment, be sure to cut off the power supply of all electrical controllers.
2. Hang warning signs. When overhauling the steel rod induction heating furnace, be sure to notify the operator and nearby employees, and hang a warning board with the words “maintenance in progress” to prevent others from starting the steel rod induction heating furnace during maintenance, otherwise it will cause unpredictable safety problems
Overseas manager: Tom Wang
Phone: 0086-13303078975(whatsapp, wechat,line)
Post time: 10-21-2021