Depth analysis of induction billet heater used for billet rolling rebars
Induction billet heater is widely used in industry, but many people do not know much about the induction billet heater. Today, we will come to understand the induction billet heater in depth.
The billet induction heating furnace is used for: continuous casting billet (billet, slab, round billet, rectangular billet) preheating or reheating before entering the rolling mill to achieve continuous casting and rolling production.
The characteristics of the Forever induction billet heater are:
1. High efficiency of induction heating, the highest efficiency of induction heating furnace can reach 70%, especially the efficiency of induction melting furnace can reach 75%.
2. Induction heating equipment has greatly reduced the workshop temperature and improved the labors conditions because of less heat loss. Induction furnace heating does not produce smoke and dust, so purify the working environment of the workshop.
3. Because the induction equipment has high heating speed and high efficiency, the heating time is short and the burning rate of oxide scale produced by the blank is 0.5%-1%.
4. The heating speed is fast, the productivity of heating equipment can be doubled, and the continuous production line can be formed with other equipment.
5. Utilize the advantage of fast induction heating speed to supplement the heating of the blank, so that the surface of the blank can reach the temperature needed for reprocessing rapidly so as to make full use of the waste heat of the blank itself and make it energy-saving.
Knowing so much is helpful to your purchase of induction billet heater ? For more information about the billet rolling line and other induction heat treatment furnace, please call our service hotline. We have professional technicians to provide you with one-to-one service.
Overseas manager: Tom Wang
Phone: 0086-13303078975(whatsapp, wechat,line)
Specialist of induction heating equipment is glad to be your partner in the field of induction heating.
Post time: 08-27-2018